Table of Contents
Advertisement
To use the composite video connector
To connect the audio connectors
To use the RF connector
output stereo audio. But if you use a conversion cable, such as
SCART-to-Component, you have to make audio connections.
If your television does not have any video and audio input, you
will need to use the radio frequency output from the digital
receiver.
2.4 Connecting up your digital receiver 11
You will need to obtain a composite video
cable (RCA cable) to use the composite video
connector. Plug one end of the cable into the
VIDEO (yellow) socket on the digital receiver,
and plug the other end into the matching
socket on your television.
You will need to obtain an audio cable (RCA
cable) to connect the audio connectors. Plug
one end of the cable into the AUDIO L (white)
and AUDIO R (red) sockets on the digital re-
ceiver, and plug the other end into the match-
ing sockets on your television or audio sys-
tem.
To enjoy Dolby digital audio, your televi-
sion or audio system must be able to decode
Dolby digital audio, and you will need to
obtain a S/PDIF cable.
the cable into the S/PDIF socket on the digi-
tal receiver, and plug the other end into the
matching socket on your audio system.
Plug one end of
Advertisement
Table of Contents
