Lock/Unlock, Burn In,Service Mode - Philips Rotary Mower Service Manual

http://j d wx z l w.5d6d.com/? f romuser= S NvÛ ~ ô O î
V30 107B5
X 6
Go to cover page
OSD Lock
OSD lock is a feature which disables the OSD controls. It can be used
when the monitor is set up for demonstration purposes or when
adjustment of the OSD is not desirable.
Switch on OSD lock feature:
Press and hold the button continuously for 15 seconds.
Release the button when the message
"CONTROL MENU IS LOCKED" appears.
Switch off OSD lock feature:
Press and hold the button continuously for 15 seconds or until the
message window "CONTROL MENU IS LOCKED" disappears, and
"MAIN CONTROLS" appears.
To access factory mode
1. Turn off monitor (don't turn off PC)
2. Press '" " and " " simultaneously on the front control
panel,then press " ",wait till the OSD menu with characters
V30 107B5 P V0.51 20021220 (below OSD menu)" come on the
screen of monitor.
MODEL SELECT
Factory
Mode
Indicator
V30 107B5 P
3. If OSD menu disappears on the screen of monitor, press "
again (anytime), then the OSD menu comes on the screen again.
4. Using " " : to select OSD menu.
5. Using " " : to increase or decrease the setting.
6. Using " " to access/confirm the selection.
To leave factory mode
7. After alignment of factory mode, turn off monitor (if you do not turn
off monitor, the OSD menu is always at the factory mode), then
turn on monitor again (at this moment, the OSD menu goes back
to user mode).
[ ¶ u 5~ ô O î • De™•Q ÿ Q M •9 N •} T yÍ ~ ô O î • De™
Lock/Unlock, Factory Mode, Burn In, Service Mode
V0.51 20021220
To access BURN IN mode
First of all, monitor displays an image.
1. Disconnect the video cable (interface cable).
2. Turn off monitor
3. Press '" " and "
panel,then the BURN IN mode comes on the screen of monitor
as below.
50 seconds around
5 seconds around
repeatly
4.
Reconnect the video cable, then return to normal image.
SERVICE MODE (Indication-Factory mode)
00010
MODEL SELECT
V30 107B5 P V0.51 20021220
Default setting of MODEL SELECT (Do not change it.)
MODEL SELECT
107T5
107B5
RESERVE
RESERVE
RESERVE
SWDDC
Lf3
"
" simultaneously on the front control
00010: stands for
1. using 10 hours already.
2. turn on/off 10 times.
3. using several hours
+ turn on/off monitor.