Lcd Contrast - Samsung WIP-500M User Manual

Reset
This function enables you to initialize all the functions and status of a phone.
[MENU] 5. Phone Settings
. Reset [OK]
[OK] Enter a Password
To reset the status of a phone, select '1: Reset All' . All the
saved records as well as the phone options are deleted.
To reset the options for the phone functions, select '2: Reset
Func.' .

LCD Contrast

This feature support to set the LCD contrast if you want to change it.
[MENU] 5. Phone Settings
#. LCD Contrast [OK]
density)
50
[OK] Enter a Password
(Select Reset Option)
(Yes/No) [OK]
[OK] Enter a Password
(Control 'Bright/Dark'
Home Page
SYSTEM
Press the [MENU] button in idle mode, and then select the [6. System] icon.
The systems which support the WBS24 (Access Point), WIP-5000M
are as follows:
iDCS 100 Release 2 / OfficeServ
iDCS 500 Release 2 / OfficeServ
OfficeServ 7000 Series
Phone Registration
This function enables you to register a phone via the system.
Registering at the DHCP system
This function enables your phone to register at the system which supports the
dynamic IP mode.
[MENU] 6. System [OK]
(Select System to Register)
Mode Enter SSID [OK]
Enter Password [OK]
• SSID: Enter the ESSID set on the WBS24, a Wireless LAN access device.
• User ID: Enter the ID of the phone user registered to the system.
• Password
• Encryption Key: This is an encryption key for security. Use the 128 bit WEP
key. When the encryption key is set on the system, consult the system admin-
istrator and enter the value set on the system.
Table of Contents WIP-5000M Guide
1. Registration [OK]
[OK] 1: DHCP
Enter User ID [OK]
Enter Encryption Key [OK]
51