Make Connections - JVC GR-DVL9800 Instructions Manual

To
To JLIP S-VIDEO
(EDIT)
Core filter
S-Video cable
(provided)
Editing cable
(provided)
"Y/C"/"CVBS"
video out
select switch
To Remote
PAUSE or
R.A.EDIT
To PAUSE IN
DISPLAY
RM-V716U
(provided)
* Connect when an S-Video cable is not used.
** When connecting cables, open this cover.
ATTENTION FOR EDITING CABLE
• Be careful not to mistake it for the JLIP
cable ( pg. 4).
• Make sure you connect the end with the
core filter (plug which has 3 rings around
the pin) to the camcorder.
Connector
cover**
To AV
Core filter
Audio/Video cable
[mini-plug to RCA plug]
(provided)
To AUDIO, VIDEO*
and -IN
connectors
If your VCR has the
SCART connector,
use the provided
cable adapter.
VCR
TV

MAKE CONNECTIONS

Also refer to pg. 58 and 59.
1
A JVC VCR equipped with a remote pause
connector . . .
... connect the editing cable to the Remote
PAUSE connector.
A JVC VCR not equipped with a remote
pause connector but equipped with an R.A.
EDIT connector . . .
... connect the editing cable to the R.A.EDIT
connector.
A VCR other than above . . .
... connect the editing cable to the RM-V716U's
PAUSE IN connector.
2
Insert a recorded tape into the camcorder and set the
Power Switch to "
Lock Button located on the switch.
3
Turn the VCR power on, insert a recordable tape and
engage the AUX mode (refer to the VCR's instructions).
NOTES:
Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do,
they will be recorded onto the new tape.
To choose whether or not the following displays appear
on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF" in the
Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the Menu
Screen ( pg. 46).
•Playback Sound Mode, Tape Speed And Tape Running
Displays
.... set "ON SCREEN" to "LCD" or "SIMPLE" in the
Menu Screen (
RM-V716U remote control.
For GR-DVL9800 owners: Make sure to set "AV/
S-VIDEO" to "OFF" in the Menu Screen (
Use the provided cables, making sure to connect the
ends with a core filter to the camcorder. The core filter
reduces interference.
Set the video out select switch of the cable adapter as
required:
Y/C : When connecting to a TV or VCR which accepts
Y/C signals and uses an S-Video cable.
CVBS : When connecting to a TV or VCR which does not
accept Y/C signals and uses an audio/video cable.
When editing on a VCR equipped with a DV input
connector, an optional DV cable can be connected
instead of an S-Video cable and audio/video cable.
" while pressing down the
pg. 46).
pg. 46). Or, press DISPLAY on the
pg. 46).
CONTINUED ON NEXT PAGE
73
EN