Using The Remote Control Unit; Installing The Batteries - JVC GR-DVL920 Instructions Manual

54
EN
1
3
Remote sensor
Tab
2
+
–
–
+

USING THE REMOTE CONTROL UNIT

The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible.

Installing The Batteries

The remote control uses two "AAA (R03)" size
batteries. See "General Battery Precautions"
( pg. 75).
1
Open the battery compartment cover as illustrated.
2
Insert two "AAA (R03)" size batteries in the
correct direction.
3
Replace the battery compartment cover.
When using the remote control, be sure to point it
at the remote sensor. The transmitted beam's
approximate effective distance for indoor use is
5m (16ft).
The transmitted beam may not be effective or
may cause incorrect operation outdoors or when
the remote sensor is directly exposed to sunlight
or powerful lighting.