Snapshot (For Tape Recording) - JVC GR-DVL520 Instructions Manual

40
EN
SNAPSHOT Button
Lock Button
Display
SNAP MODE – FUL L
P I N–UP
FRAME
There is the sound effect of a shutter closing.
Power Switch
VIDEO/MEMORY Switch
(GR-DVL720/DVL520 only;
open the LCD monitor to
access this switch.)
Menu Screen
GR-DVL720/DVL520
only
FULL
Snapshot mode
with no frame
PIN-UP
Pin-Up mode
FRAME
Snapshot mode
with frame
FOR RECORDING

Snapshot (For Tape Recording)

This feature lets you record still images that look like
photographs onto a tape.
SNAPSHOT MODE SELECTION
1
Set the VIDEO/MEMORY Switch to "VIDEO" (GR-
DVL720/DVL520 only), then set the Power Switch to
" " while pressing down the Lock Button
located on the switch.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select "
CAMERA". Press it and the CAMERA Menu
appears.
4
Rotate the MENU/BRIGHT wheel to select
"SNAP MODE", then press it.
5
Rotate the MENU/BRIGHT wheel to select the
desired Snapshot mode, then press it.
Rotate the MENU/BRIGHT wheel to select
" RETURN" and press it twice. The Menu Screen
closes.
SNAPSHOT RECORDING
1
Press SNAPSHOT. "PHOTO" appears while the
snapshot is being taken.
If you press during Record-Standby . . .
..... "PHOTO" appears and a still image will be recorded
for approx. 6 seconds, then the camcorder re-enters
the Record-Standby mode.
If you press during Recording . . .
..... "PHOTO" appears and a still image will be recorded
for approx. 6 seconds, then the normal recording
resumes.
• Regardless of the Power Switch position ("
" "), Snapshot recording takes place using the
selected Snapshot mode.
Motor Drive Mode
Keeping SNAPSHOT pressed provides an effect similar
to serial photography. (Interval between still images:
approx. 1 second)
NOTES:
To remove the shutter sound,
If Snapshot recording is not possible, "PHOTO" blinks
when SNAPSHOT is pressed.
If Program AE with special effects (
engaged, certain modes of Program AE with special
effects are disabled during Snapshot recording. In such
a case, the icon blinks.
If SNAPSHOT is pressed when "DIS" is set to "ON"
( pg. 45), the Stabilizer will be disabled.
The Motor Drive mode is disabled when "REC
SELECT" is set to "
Screen ( pg. 47).
During tape playback as well, all snapshot modes are
available when "
the Menu Screen (
sound is not heard.
During Snapshot recording, the image displayed in the
viewfinder may be partially missing. However, there is
no effect in the recorded image.
When a cable is connected to the AV connector, the
shutter sound is not heard from the speaker, however it
is recorded onto the tape.
"BEEP" on pg. 44, 46.
pg. 36) is
/ " in the Menu
COPY" is set to "OFF" in
pg. 48). However, the shutter
(cont.)
" or