Toyota RAV4 2009 Features Manual page 152

152
6) Warning
General
When any of the situations below occurs, the smart key system causes the certification ECU to sound
a buzzer in the combination meter and the wireless door lock buzzer, and illuminate the smart key
system warning light in order to alert the driver.
Situation
The shift lever is in a position other than "P" and the power source mode is in other
A
than "OFF".
B The driver door is opened while the steering is unlocked.
C The shift lever is in "P" and the power source mode is not "OFF".
D The entry lock is operated while any of the doors are open.
E The occupant leaves with the key.
F The engine switch is operated while the key is outside the actuation area.
G The entry lock is operated while the key is inside the vehicle.
H The key battery is low.
I The steering lock cannot be released.
J A steering lock ECU malfunction has been detected.
K A main body ECU malfunction has been detected.
Situation: A
There are two patterns for situation A.
Pattern 1: The door is opened and the user tries to leave the vehicle.
Pattern 2: In addition to pattern 1, the user holds the key and tries to move away from the vehicle.
In these situations the following control is performed:
Pattern 1
Possible Effects without Warning
Warning Condition
Warning Stop Condition
Combination
Meter
RAV4 – NEW FEATURES
Sudden vehicle start, vehicle theft, vehicle roll-away
The certification ECU gives a warning when all the following
conditions are satisfied:
D Shift lever is not in "P".
D Power source mode is not "OFF".
D Driver door is opened.
D Vehicle speed is 0 mph (0 km/h).
The warning is stopped when one of the following conditions
is met:
D Power source mode is "OFF".
D Shift lever is in "P".
D Driver door is closed.
D Vehicle speed is above 0 mph (0 km/h).
Buzzer Continuously sounds
Condition