Media Settings - D-Link DCS-5615 User Manual

Configuration

Media Settings

Click Add Media to open the Media Settings page. On this page, you can
specify the type of media that will be sent when a trigger is activated. A total of
5 media settings can be configured.
Media name: Enter a name for the media setting.
Media Type: There are three choices of media types available: Snapshot,
Video Clip, and System log. Select the item to display the detailed
configuration options. You can configure either one or all of them.
Snapshot: Select to send snapshots when a trigger is activated.
Source: Select to take snapshots from stream 1 ~ 3.
Send pre-event images: The camera has a buffer area. It temporarily holds
data up to a certain limit. Enter a number to decide how many images to
capture before a trigger is activated. Up to 7 images can be generated.
Send post-event images: Enter a number to decide how many images to
capture after a trigger is activated. Up to 7 images can be generated.
File name prefix: Enter the text that will be appended to the front of the file
name.
Add date and time suffix to the file name: Select this option to add a date/
time suffix to the file name.
Click Save to enable the settings, then click Close to exit the page.
D-Link DCS-5615 User Manual 55