Port And Access Name Settings - D-Link DCS-5615 User Manual

Configuration

Port and Access Name Settings

HTTPS
By default, the HTTPS port is set to 443. It can also be assigned to another
port number between 1025 and 65535.
Note: JPEG only transmits a series of JPEG images to the client. In order to
utilize this audio feature, make sure the video
mode is set to H.264 or MPEG-4 and the media option in "Client Settings" is
set to Video and Audio.
FTP
The FTP server allows the user to save recorded video clips. You can utilize
D-Link's IP Cam Wizard to upgrade the firmware via FTP server. By default,
the FTP port is set to 21. It also can be assigned to another port number
between 1025 and 65535.
HTTP port/Secondary HTTP port
They can also be assigned to another port number between 1025 and
65535. To access the Network Camera on the LAN, both the HTTP port
and secondary HTTP port can be used to access the Network Camera For
example, when the HTTP port is set to 80 and the secondary HTTP port is set
to 8080. You can login camera as example link as below:
Http://192.168.0.20 or
Http://192.168.0.20:8080
Authentication: Depending on your network security requirements, the
Authentication: Depending on your network security requirements, the
Network Camera provides three types of security settings for streaming via
HTTP protocol: disable, basic, and digest. If basic authentication is selected,
the password is sent in plain text format, but there can be potential risks
of it being intercepted. If digest authentication is selected, user credentials
are encrypted using MD5 algorithm, thus providing better protection against
unauthorized access.
D-Link DCS-5615 User Manual 38