Usb Settings; Usb Mass Storage - TP-Link TD-W8960N User Manual

300mbps wireless n usb adsl2+
Hide thumbs Also See for TD-W8960N:
Table of Contents

Advertisement

TD-W8960N

4.7 USB Settings

There are six submenus under the USB Settings menu, USB Mass Storage, User Accounts,
Storage Sharing, FTP Server, Media Server and Print Server. Click any of them, and you will be
able to configure the corresponding function.
4.7.1

USB Mass Storage

Choose menu "USB Settings → "USB Mass Storage", you can configure a USB disk drive
attached to the modem router and view volume and share properties such as share name,
capacity, status, and action, etc on this page as shown below.
Volume: The volume name of the USB drive the users have access to.
File System: The system of the USB drive.
Capacity: The storage capacity of the USB driver.
Status: Indicates the shared or non-shared status of the volume. Online means volume can
be shared, while Offline means volume can not be shared. If Deactivate in Action field is
enabled, Disabled will be displayed in the Status field, which means volume can not be
shared.
Action: When the volume is shared, you can click the Deactivate to stop sharing the volume;
when volume is non-shared, you can click the Enable button to share the volume.
Click Disconnect to safely remove the USB storage device that is connected to USB port.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-103
82

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TD-W8960N and is the answer not in the manual?

Table of Contents