TP-Link TD-W8960N User Manual page 48

TD-W8960N
To add a Time Restriction entry:
1. Click the Add button in Figure 4-37, and then you will see the next screen as shown in Figure
4-38.
2. Enter the User Name of the LAN device connected to the router.
3. To restrict the device where the browser is running, select the Browser's MAC Address
radio button. The MAC Address has been automatically displayed in the text box. To restrict
other LAN devices, click Other MAC Address radio button and enter the MAC address of the
other LAN device.
4. Select the day to allow the rule to take effect in the table.
5. Enter the Start Blocking Time and End Blocking Time in the text box separately, and then
the device controlled will then be unable to connect to the internet during that time.
6. Click Save/Apply to save this entry and then you will see your settings as shown in Figure
4-37.

Note:
The Time Restriction will not work correctly before the time of the device is set in "Management
 Internet Time".
4.4.7.2 URL Filter
This feature allows you to configure the filter rules based on URL to control all the computers in the
LAN to access the specified port, and it is independent with Time Restriction feature.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-38
Figure 4-39
39