Chevrolet 2013 VOLT Owner's Manual page 91

To disconnect from one caller while
in a conference call, select Detach
Number from the menu and select
the number to hang up on.
Ending a Call
Press the TUNE/MENU knob and
select Hang Up or press the
button on the steering wheel
controls.
To Mute a Call
Press the TUNE/MENU knob and
select Mute Call.
To Cancel Mute
Press the TUNE/MENU knob and
select Mute Call to cancel mute.
Dual Tone Multi-Frequency (DTMF)
Tones
The UHP system can send numbers
during a call. This is used when
calling a menu-driven phone
system.
To access this system:
1. Press the TUNE/MENU knob
and select Enter Number.
2. Enter the character sequence.
Operating UHP Using Voice
Control
/
The voice control of the UHP
system enables you to operate
several functions of the mobile
phone using your voice. The UHP
system uses voice commands to
control the system and dial phone
numbers. After input of the
command, the infotainment system
guides you through the dialogue
with appropriate questions and
feedback to achieve the desired
action. The commands and
numbers can be spoken without a
pause between the individual words.
In addition, you can save telephone
numbers under a name tag selected
by you. The telephone connection
can be set up with this name.
Infotainment System
In the event of incorrect operation or
incorrect codes, the voice control
gives you voice feedback and
requests you to re-enter the desired
command. Apart from this, the voice
control acknowledges important
commands and will ask if
necessary.
In order that calls made inside the
vehicle do not lead to unintentional
voice activation of the mobile
phone, the voice control does not
start until it has been activated.
Activating the Voice Control
Press the / button on the
steering wheel to activate the voice
control of the UHP system. The
system responds with a tone. After
the tone, say "Phone."
For the duration of the dialogue, any
audio source that is active is muted
and any traffic news fade-in is
cancelled.
91