Chevrolet 2013 VOLT Owner's Manual page 8

8 Infotainment System
Storing Radio Station Presets
Up to 36 preset stations can be
stored. AM and FM can be mixed.
To store presets:
1. Press VOL/ to turn the
system on.
If viewing a map screen, press
the RADIO/BAND button.
2. Select the band.
3. Seek or tune to the desired
station to select it.
4. Press and hold one of the preset
screen buttons for more than
two seconds.
5. Repeat the steps for each
preset.
To change the number of preset
pages, see Mixed-Band Presets
under AM-FM Radio (Without
Navigation) on page 25 or AM-FM
Radio (With Navigation) on page 16
for more information.
Entering an Address and Point
of Interest and Storing Preset
Destinations
The vehicle must be in P (Park) to
perform these operations.
Entering an Address
To more easily find a city or a
street name:
Enter the street name first
instead of the city name, or vice
versa.
Enter more characters or reduce
the number of characters to
reduce or expand the available
options.
To set a destination by entering a
street name:
1. Press the DEST button.
2. Press the Address Entry button
on the touch screen.
3. Select the street name field.
Enter the street name. Do not
enter directional information or
street type. Use the space
screen button between street
and city names. Use the
backspace screen button to
delete an incorrect character.
A list displays if four or fewer
names are available. If there are
more than four, there is a match
counter with a number of
available streets. Press the List
screen button to view the list and
select the street.
4. Press the country name field on
the touch screen to change it.
The last country name is
automatically recalled.
5. Select the city from the list or
enter the city name.
6. Enter the house number. This
field is automatically selected.
7. Press the OK screen button. The
address information screen
displays the address entered.
8. Press the Go screen button if
correct. The route will calculate.