Chevrolet 2013 VOLT Owner's Manual page 88

88 Infotainment System
Connecting a Phone via SAP
1. Turn the infotainment system on.
2. Press the CONFIG button.
3. Select Add SIM access device.
The system scans for available
devices and displays a list of
devices found.
4. Select the mobile phone from
the list.
The SAP passcode prompt is
shown on the infotainment
display containing a
16-digit code.
5. Enter the displayed SAP
passcode in the mobile phone
(without spaces).
The mobile phone PIN is shown
on the infotainment display.
If the PIN request function is
active on the mobile phone, the
PIN for the SIM card must be
entered.
Using UHP with Infotainment
Controls
Pairing a Phone
If your mobile phone has simple
pairing or auto discovery features,
they need to be turned off before
the mobile phone can be paired to
the UHP system. Refer to the
mobile phone manufacturer's user
guide for information on these
features.
1. Press the CONFIG button.
0
2. Press / on a navigation
radio.
3. Select Bluetooth.
4. Select Pair Device or Add new
Hands-free (HF) device.
A four-digit number appears on
the display and the UHP system
goes into discovery mode.
5. Start the pairing process on the
mobile phone that will be paired
to the vehicle. Refer to the
mobile phone manufacturer's
user guide for information on this
process.
Locate the device named UHP
followed by a four-digit number
in the list on the mobile phone
and follow the instructions on the
mobile phone. Enter the
four-digit code provided by the
system if necessary, then follow
the instructions on the
infotainment display screen.
6. Repeat Steps 1 through 5 to pair
additional mobile phones.
Viewing All Paired and Connected
Phones
To view all available mobile phones
that are paired to the UHP system:
1. Press the CONFIG button.
0
2. Press / on a navigation
radio.
3. Select Bluetooth.
4. Select Device List.