Basic Settings; Setup Wizard Screen; Isp Connection Settings Screen - VTech VONAGE IP8100 Series Feature Manual

Broadband phone 5.8 ghz digital spread spectrum start-up kit

Hide thumbs Also See for VONAGE IP8100 Series:

Table of Contents

Basic Settings

Click Run Wizard for a simple, step-by-step conﬁguration of your IP8100 series

telephone settings. It is usually not necessary to do this after initial setup is

complete.

To re-run the Wizard to update settings, please see the Setup Wizard section

on page 12.

Use this screen to view or change the Internet connection type required by your

Internet Service Providers. Please check with your Internet Service Provider for

the required conﬁguration settings.

ISP Connection Settings: Dynamic IP Address

This setting is usually required for use with cable modems. Choose this setting if

you don't have to enter a username/password to access the Internet when you

ﬁrst turn on your computer. With this option, IP addresses are assigned by your

ISP automatically.

Table of Contents

Do you have a question about the VONAGE IP8100 Series and is the answer not in the manual?