Dubbing To Or From A Video Unit Equipped With A Dv Connector (Digital Dubbing) - JVC GR-DF460 Instructions Manual

To use this camcorder as a recorder
(GR-DF430 only)
1
Following the illustrations, connect the
camcorder and the VCR's output connectors.
2
Set "REC MODE" to "SP" or "LP". (
3
Set the camcorder's Power Switch to "PLAY".
4
Set "S/AV INPUT" to "ON". (
5
Press the Recording Start/Stop Button to
engage the Record-Pause mode.
The " " indication appears on the screen.
A/V IN
6
Start playback on the player.
7
At the point you want to start dubbing, press
the Recording Start/Stop Button to start
dubbing. The indication rotates.
8
Press the Recording Start/Stop Button again
to stop dubbing. The
rotating.
9
Press 8 to return to the normal playback
mode.
NOTES:
After dubbing, set "S/AV INPUT" back to "OFF".
Analogue signals can be converted to digital
signals with this procedure.
It is also possible to dub from another camcorder.
pg. 38)
pg. 37, 42)
indication stops
Dubbing To Or From A Video Unit
Equipped With A DV Connector
(Digital Dubbing)
It is also possible to copy recorded scenes from
the camcorder onto another video unit equipped
with a DV connector. Since a digital signal is
sent, there is little if any image or sound
deterioration.
To DV IN/OUT
Core filter
Video unit equipped with DV connector
EDITING
53
EN
DV cable (optional)
To DV IN/OUT
CONTINUED ON NEXT PAGE