Functional Description - Bosch GSR 10,8 V-LIQ Professional Original Operating Instructions

OBJ_BUCH-756-002.book Page 8 Monday, June 9, 2008 2:18 PM
8 | English
Hold the power tool only by the insulated
gripping surfaces, when performing an oper-
ation where the cutting tool may run into
hidden wiring. Contact with a "live" wire will
make exposed metal parts of the tool "live"
and shock the operator.
Hold the power tool with a firm grip. High re-
action torque can briefly occur while driving in
and loosening screws.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the power tool has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before in-
serting battery pack. Carrying the power tool
with your finger on the On/Off switch or in-
serting the battery pack into power tools that
have the switch on invites accidents.
Do not open the battery. Danger of short-cir-
cuiting.
Protect the battery against heat, e.g., al-
so against continuous sun irradiation and
fire. There is danger of explosion.
In case of damage and improper use of the
battery, vapors may be emitted. Provide for
fresh air and seek medical help in case of
complaints. The vapors can irritate the respi-
ratory system.
When the battery is defective, liquid can es-
cape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.
Use the battery only in conjunction with your
Bosch power tool. This measure alone pro-
tects the battery against dangerous overload.
2 609 140 527 | (9.6.08)

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.
Intended Use
The tool is intended for driving in and loosening
screws as well as for drilling in wood, metal, ce-
ramic and plastic.
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Keyless chuck
2 Front sleeve
3 Rear sleeve
4 Torque presetting ring
5 Rotational direction switch
6 On/Off switch
7 Battery release button
8 Battery*
9 "Power Light"
10 Universal bit holder*
11 Screwdriver bit*
12 Utility clip*
13 Craftsman case*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools