White Balance Adjustment; Manual White Balance Adjustment - JVC GR-D320E Instructions Manual

FEATURES FOR RECORDING
30
EN

White Balance Adjustment

The white balance refers to the correctness of
colour reproduction under various lighting. If the
white balance is correct, all other colours will be
accurately reproduced.
The white balance is usually adjusted
automatically. However, more advanced
camcorder operators control this function
manually to achieve a more professional colour/
tint reproduction.
To change the setting
Set "W.BALANCE" in FUNCTION Menu
( pg. 24)
The selected mode indicator except "AUTO"
appears.
[AUTO]: White balance is adjusted
automatically.
MWB: Adjust the white balance manually
when shooting under various types of lighting.
(

"Manual White Balance Adjustment")

FINE: Outdoors on a sunny day.
CLOUD: Outdoors on a cloudy day.
[ ] = Factory-preset
To return to automatic white balance
Set "W.BALANCE" to "AUTO". (
Manual White Balance Adjustment
Adjust the white balance
manually when shooting
under various types of
lighting.
1
Set the Power Switch
to "REC".
2
Set the recording
mode to "M" (
3
Hold a sheet of plain white paper in front of
the subject. Adjust zoom or position yourself so
that the white paper fills the screen.
4
Select FUNCTION Menu. (
5
Select "MWB" in "W.BALANCE" menu.
(
When the setting is completed,
blinking.
6
Press SET or
7
Press MENU. The Menu Screen closes and
the Manual White Balance indicator
displayed.
NOTES:
pg. 24)
In step 3, it may be difficult to focus on the white
paper. In such a case, adjust focus manually.
(
A subject can be shot under various types of
lighting conditions indoors (natural, fluorescent,
candlelight, etc.). Because the colour temperature
is different depending on the light source, the
subject tint will differ depending on the white
balance settings. Use this function for a more
natural result.
Once you adjust white balance manually, the
setting is retained even if the power is turned off or
the battery removed.
pg. 14)
.
pg. 24), then press and hold SET or
begins blinking.
to engage the setting.
pg. 28)
White paper
pg. 24)
until
stops
is