Inserting The Battery Pack; Connecting The Ac Adapter; Startup And Shutdown - Panasonic CF-25 Series Operating Instructions Manual

Startup and Shutdown

Inserting the Battery pack

Connecting the AC Adapter

1
Power On
First time computer is started only
Windows 95 Setup
8
Insert the provided battery pack (
3
2
MEMO
The supplied battery is not charged. When using the computer for the
first time, be sure to charge the battery pack before using the computer.
Connecting the AC adapter automatically starts the charging process.
Check the battery indicator to confirm the current charging status.
Power Switch
Slide
CAUTION
When the power is turned on at the first time, before you use software programs
furnished with this product, please read through "LIMITED USE LICENSE AGREE-
MENT" ( P.33). Then remove the seal.
Select settings for your region, then click [Next].
1
Select your Keyboard Layout, then click [Next].
2
( for U.S.A. : "United States 101", for U.K. : "British" )
Type your name and the name of your company, then click [Next].
3
The License Agreement should be displayed. Read the Agreement, check
4
"I accept the agreement", and click [Next].
Type in the product number printed on the Certificate of Authenticity;
5
the Certificate is attached to the "Introducing Microsoft Windows 95
book" included in the "Windows 95 system pack". Click [Next].
Click [Finish] to start Wizard.
6
If the instruction to restart appears, click [OK].
7
Set the correct Date & Time and Time Zone, then click [Close]. (Note:
8
These settings can be changed later.)
If you want to install your printer driver(s), click [Next]. Follow the
9
prompts on the screen to specify the printer(s). Otherwise, click [Can-
cel]. (Note: Printer drivers can be added later.)
P.15).
NOTE
Use only the specified AC adapter (CF-AA1526).
Connect the AC cord to the AC adapter.
1
Plug the AC cord into an AC outlet.
2
Plug the AC adapter into the computer.
3
Lift the latch and
open up the display.
Do not turn the computer off immediately
after turning it on.
Also, allow at least 10 seconds to elapse
after you have switched off the power and
want to turn the computer back on again.
Slide the power switch toward the rear of the computer
and hold it there for about one second.
CAUTION