Hardware Technical Data - Panasonic CF-25 Series Operating Instructions Manual

Hardware Technical Data

Displaying an address map
Printing an address map
To install expansion cards in the computer, follow the procedure below to obtain an
address map. The, select values for the interrupt level (IRQ), I/O port address and
memory range and DMA channel that are not being used.
Select [Start]-[Settings]-[Control Panel]-[System].
1
Select [Device Manager].
2
Click [Properties].
3
Select [Start]-[Settings]-[Control Panel]-[System].
1
Select [Device Manager].
2
Click [Print].
3
Click the [System Summary] box and then click [OK].
4
The standard I/O addresses are listed below.
0000H - 00FFH (System Board)
x1F0H - x1F7H (Hard disk drive)
x220H - x22FH (Sound controller)
x2F8H - x2FFH (Infrared communication port)
x378H - x37FH (Parallel port)
x388H - x38BH (FM synthesizer)
x3B0H - x3BBH (Display controller)
x3C0H - x3DFH (Display controller)
x3E0H - x3E3H (PC card controller)
x3F0H - x3F7H (Floppy disk drive)
x3F8H - x3FFH (COM port)
An "X" at the beginning of an address indicates that the address cannot be used,
regardless of its value.
31