Datalogic Gryphon GD44XX Quick Reference Manual page 34

Programming Mode
when the reader is in Programming Mode
INDICATION
Label Program-
ming Mode Entry
Label Program-
ming Mode Rejec-
tion of Label
Label Program-
ming Mode
Acceptance of
Partial Label
Label Program-
ming Mode
Acceptance of
Programming
Label Program-
ming Mode Can-
cel Item Entry
30
The following indications ONLY occur
-
DESCRIPTION
A valid programming
label has been scanned.
A label has been
rejected.
In cases where multi-
ple labels must be
scanned to program
one feature, this indica-
tion acknowledges
each portion as it is suc-
cessfully scanned.
Configuration option(s)
have been successfully
programmed via labels
and the reader has
exited Programming
Mode.
Cancel label has been
scanned.
LED and Beeper Indications
.
LED
LED blinks
continuously
N/A
N/A
N/A
N/A
Gryphon™ I GD44XX
BEEPER
Reader sounds
four low fre-
quency beeps.
Reader sounds
three times at
lowest fre-
quency and cur-
rent volume.
Reader sounds
one short beep at
highest fre-
quency and cur-
rent volume.
Reader sounds
one high fre-
quency beep and
4 low frequency
beeps followed
by reset beeps.
Reader sounds
two times at low
frequency and
current volume.