5. In the NVIDIA Control Panel dialogue box, click set up Multiple Displays
to set up your CRT and notebook displays.
Displaying movies on a TV
This section describes how to set up your system to display movies
simultaneously on your computer's LCD and on an external TV.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out monitor port.
3. Turn the television on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 to change the display device. Refer to
Chapter 5, The Keyboard.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below, based on the configuration of your
computer:
1. Click Start > Control Panel > Personalization.
2. Choose Display Settings.
B-8
Display Modes
Satellite X200/Satellite Pro X200