End Piece And Reflector End Cap; 90° Elbow - Roberts Gorden CTH2 Series Installation, Operation And Service Manual

ROBERTS GORDON ® CTH2-Series S

End Piece and Reflector End Cap

Reflector
End Cap
End Piece
90° Elbow
Inside
Corner
Grille Brackets
Joint Piece
Decorative Grille
Brackets
© 2004 Roberts-Gordon
S
UBMITTAL HEET
Insert end piece
between grille and
brackets.
Fasten end piece
to brackets using two
#8 sheet metal screws
and replace reflector end cap.
Cut grille bracket at
reflector joint piece.
APPLICATIONS, ENGINEERING AND DETAILED GUIDANCE ON SYSTEMS DESIGN, INSTALLATION AND PRODUCT PERFORMANCE IS AVAILABLE UPON REQUEST. ROBERTS GORDON
INSTALLED ONLY IN ACCORDANCE WITH LOCAL LAWS, CODES AND REGULATIONS, AND ONLY BY A CONTRACTOR QUALIFIED IN THE INSTALLATION AND SERVICE OF GAS-FIRED HEATING EQUIPMENT.
Description
End Piece
Joint Piece
Part Number
01365901
Insert
End Piece
between
grille and
brackets.
® PRODUCTS ARE TO BE