7.6 Protective Grille
• Do not touch the heater
• Keep all persons, especially children, away
from the heater.
• Use of protective grille (included with select
models) is recommended.
A protective grille is included with select models of the
CGTH-Series heater. This grille is supplied in sections
and must be installed on the underside of the reflector
prior to operation.
FIGURE 15: Reflector and Grille
Burner
First Grille Sections
The Model CGTH-30 heater is 8' (2.5 m) long and
requires installation of two protective grille sections and
one grille endcap, while the Models CGTH-40 and
CGTH-50 are 11' 6" (3.5 m) long and require three pro-
tective grille sections and one grille endcap.
One grille has a formed end panel and is installed at the
end of the reflector that is furthest from the burner box.
The other grille has an open-end and is installed closest
to the burner box.
To purchase the protective grille for your heater, please
contact your installer.
Front Fixed Hanger
Final Grille Section
Reflector
SECTION 7: I
NSTALLATION
Grille
End Cap
21 of 29