Tape Dubbing - JVC GR-AXM368EG Instruction Manual

TAPE DUBBING

PLAY/PAUSE
When connecting
the cables, open the
jack cover.
Audio and Video
cables (provided)
VCR (Recording deck)
Tape Dubbing
1
2
3
4
5
Power Switch
To AUDIO and
VIDEO OUT
6
connectors
7
To AUDIO and
VIDEO IN
connectors
CONNECT EQUIPMENT
Following the illustration to the left, connect the
camcorder and the VCR.
PREPARE FOR DUBBING
Set the camcorder's Power Switch to "PLAY", turn
on the VCR's power, and insert the appropriate
cassettes in the camcorder and the VCR.
SELECT VCR MODE
Engage the VCR's AUX and Record-Pause modes.
FIND EDIT-IN POINT
Engage the camcorder's Play mode to find a spot
just before the edit-in point. Once it's reached, press
PAUSE on the camcorder.
START EDITING
Press PLAY on the camcorder and engage the VCR's
Record mode.
STOP EDITING TEMPORARILY
Engage the VCR's Record-Pause mode and press
PAUSE on the camcorder.
EDIT MORE SEGMENTS
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
39
EN