Table of Contents
Advertisement
RETAKE (R/F)
FEATURE:
Quick Review
PURPOSE:
To check the end of the last
recording.
OPERATION:
1) Press "
during the Record-Standby mode.
Tape is rewound for about 2
seconds and played back
automatically, then pauses in
Record-Standby mode for the
next shot.
NOTE:
Distortion may occur at start of
playback. This is normal.
FEATURE:
Retake
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the
Record-Standby mode.
2) Press either RETAKE button to
reach the start point for new
recording. Pressing "F" forwards
the tape and pressing "R" reverses
it.
3) Press Recording Start/Stop Button
to start recording.
NOTE:
Noise may appear during Retake.
This is normal.
17
EN
" and release quickly
Advertisement
Table of Contents
