Canton Digital Movie 50 Operating Instructions Manual page 42

English
Problem
No playback via
Bluetooth .
®
42
Possible cause
1. there is no connection between the
DM System and the mobile end device.
2. the mobile end device is paired but
no playback takes place.
3. You are out of range.
Solution
1. Connect your mobile end device as described.
2.1. the mobile end device must be connected again.
2.2. Set the volume on the mobile end device to maximum.
2.3. increase the volume of the DM System.
2.4. ensure that interference sources like a WlAN router
or laptop are not set up in direct proximity of the DM
System.
2.5. Concurrent operation of WlAN and Bluetooth
connection from a mobile end device is not possible
without interferences in most cases. (Disable WlAN
at your mobile device.)
3. Reduce the distance between the Soundbar and your
mobile end device.
®