Table of Contents
Advertisement
Front handle
(Tighten three points evenly)
Oil
Gasoline
Fuel mix chart
(50 : 1)
US
GAS
OIL
GAL.
FL.OZ.
1
2.6
2
5.1
5
12.8
ASSEMBLING
Chuck
Drill bit
OPERATION
1
50
METRIC
GAS
OIL
LITERS
CC
4
80
8
160
20
400
FRONT HANDLE
•
Incert the front handle to the machine, and
turn clockwise.
(TIGHTEN THE SCREW FIRMLY)
DRILL BIT
•
Insert the drill bit (not provided with unit)
until it reaches the bottom of the chuck,
then back it out slightly; tighten the chuck
laws evenly and completely.
IMPORTANT
Use drill bits suited for the material being
drilled and for the depth of hole required.
CHECK UP OF NUTS AND
OTHER HARDWARES
•
Check up loose nuts, bolts and screws
before using the unit every day.
FUEL STATEMENT
GASOLINE - Use 89 Octane [(R+M)/2] gasoline
or gasohol known to be good quality- Gasohol
may contain maximum 10% ethyl (grain)
alcohol or 15% MTBE (methy tertiary- butyl
ether). Gasohol containing methyl (wood)
alcohol is not approved.
OIL - ECHO brand premium two-strokes 50:1 oil
is preferred. Mix oil and gasoline/gasohol
according to Instructions on the oil container
label.
MIXING - Follow directions on the container.
7
Advertisement
Table of Contents
