Table of Contents
Advertisement
1.2.3 Mechanical
The mechanical dimensions of the module are in conformance with ANSI/VITA 12-1996 for
single-wide M-Module modules. The nominal dimensions are 5.687" (144.5 mm) long 2.082"
(52.9 mm) wide.
1.2.4 Bus Compliance
The module complies with the ANSI/VITA 12-1996 Specification for single-wide M-Modules
and the MA-Module trigger signal extension. The module also supports the optional IDENT and
VXI-IDENT functions.
Note: C&H obtained the manufacturing rights from Hewlett Packard (Agilent) for this module. The
ID's have been retained as Hewlett Packard to provide compatibility with existing SW drivers.
1.2.5 Applicable Documents
ANSI/VITA 12-1996 Standard for The Mezzanine Concept M-Module Specification, Approved
May 20, 1997, American National Standards Institute and VMEbus International Trade
Association, 7825 E. Gelding Dr. Suite 104, Scottsdale, AZ 85260-3415,
C&H Technologies, Inc. <> 445 Round Rock West Drive <> Round Rock, Texas 78681 <> www.chtech.com
Module Type:
M-Module
Addressing:
A08
Data:
D16
Interrupts:
supported
DMA:
not supported
Triggers:
not supported
Identification:
IDENT
Manufacturer ID:
0FFF
Model Number:
0686
VXI Model Number: 025B
(See note below)
16
16
16
3
http://www.vita.com
Advertisement
Table of Contents
