C&H Technologies M221 Specifications

Specifications:

Inputs:
Maximum Voltage (terminal to
terminal or chassis)**
DC:
AC rms:
AC peak:
Maximum Current (non-inductive)
Per Switch:
DC:
AC peak:
AC rms:
Maximum Power Per Switch/Per
Module:
DC:
AC:
DC Characteristics**:
Thermal Offset: <20_V (typical)
Contact Resistance:
Contact Resistance (EOL): <3.5_
Insulation Resistance:
** See manual for conditions
C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
(512) 733-2621 • FAX (512) 733-2629 • www.chtech.com
AC Characteristics:
Bandwidth (-3dB): >10 MHz (typ)
Crosstalk (typical)
60V/200V
48V/141V <100 KHz:
68V/200V <1 MHz
<10 MHz
Close channel capacitance:
1A Ch-to-ch:
1A Ch-to-com:
0.7A
Typical Relay Life at Rated Load:
Time to open or close:
40W/100W
40VA/100VA
Connectors:
Temperature:
Operating:
<n/a_
Storage:
10E7 _
Power:
M221
8 Channel
Form C Switch
M Module
The
E2273A) provides 8 independent
non-latching SPDT switches with
maskable interrupts that occur when
the requested relay movements
have been made. This M Module is
useful when high integrity contacts
are needed driving microwave
relays located in your test adapter.
M Module Compliance
Complies with ANSI/VITA Std 12-
1996 for single-wide M Modules.
Data Transfers
Interrupts
<-70 dB
<-50 dB
Compatible with VXI, VME, PCI,
<-n/a dB
PXI, CPCI & Ethernet Carriers
Applications
<30 pF (typical)
<40 pF (typical)
• LF Signal Switching
• Microwave relay control
10E5 operations

Ordering Information

13 msec
Part Number
44 pin DSUB
(Female)

Additional Information

0°C to 55°C
User Manuals for C&H carriers and
-40°C to 75°C this module can be found on our
website at www.chtech.com.
+5V @ 0.02 A
+12V @ 0.13 A
M221 (formerly Agilent
11029560-0001
16 bit
INTC