Jensen VM9224BT Operating Instructions Manual page 22

VM9224BT
Direct Tuning
To enter a radio station directly, touch the
Ii
button (9) to display the direct
entry menu.
IFM: . _ MHz
~
2 3
~
Exit
4 5 6
7 8 9
Enter
o
Clear
Enter the desired radio station using the on-screen number pad. Touch the
Enter button to tune to the selected station. To exit the screen without
changing the station, touch Exit. To clear your entry and start over, touch
Clear.
Using Preset Stations
Six numbered preset buttons store and recall stations for each band. All six
stored stations (P1-P6) for the current band appear on the screen.
Storing
a
Station
1. Select a band (if needed), then select a station.
2. Touch the on-screen MEM button (18) to open the preset screen.
I
Preset:_
~
P2
P4 P5
Ex i
t
P3
P6
3. Touch the preset number in which you would like to store the current
station (or touch Exit to cancel and close the menu). The preset number
and station appear highlighted.
19