Tape Length Setting - JVC GR-AXM226 Instructions Manual

12
EN
MENU Wheel
Power Switch
Display
TAPE LENGTH
T 2 0
T 3 0
T 3 5
T 4 0
E X I T
TAPE LENGTH
Menu
Tape length
T 3 0
indicator
GETTING STARTED

Tape Length Setting

Set the tape length according to the length of the tape
used.
1
Set the Power Switch to "
comes on.
2
Press the MENU Wheel in. The Menu Screen
appears.
3
Rotate the MENU Wheel to select " TO SYSTEM
MENU" and press it to display SYSTEM MENU.
4
Rotate the MENU Wheel to select "TAPE LENGTH",
then press it. The TAPE LENGTH Menu appears.
5
Rotate the MENU Wheel to select the correct tape
length setting.
•T20=20 minutes
•T30=30 minutes
•T35=35 minutes
•T40=40 minutes
(in SP)
6
Press the MENU Wheel in. The Menu Screen
reappears with the highlight bar on " RETURN".
Press the MENU Wheel in to close the Menu Screen.
NOTE:
The tape remaining time (
correct tape length has been selected.
(cont.)
". The power lamp
pg. 14) is correct only if the