JVC GR-AXM226 Instructions Manual page 18

18
EN
Quick Review (2) Button
RETAKE (2/3) Button
Set to " " or " ".
Set to " " or " ".
RECORDING
Quick Review:
recording.
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press 2 and release quickly.
Tape is rewound for approx. 2 secondes and played
back automatically, then pauses in Record–Standby
mode for the next shot.
Distortion may occur at the start of playback. This is
normal.
Retake:
To re-record certain segments.
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press and hold either RETAKE to reach the start point for
new recording. Pressing 3 forwards the tape and
pressing 2 reverses it.
3) Press the Recording Start/Stop Button to start recording.
Noise bars appear and pictures may become mono-
chrome or darken during Retake. This is normal.
Basic Features (cont.)
To check the end of the last