Using The Fingerprint Sensor(Provided With Some Mod- Els); Points To Note About The Fingerprint Sensor - Toshiba Satellite M110 User Manual

User's Manual
Using the Fingerprint Sensor(pro-
vided with some models)
This product has a fingerprint utility installed for the purpose of enrolling and
recognizing fingerprints. By enrolling the ID and password to the fingerprint
authentication device, it is no longer necessary to input the password from the
keyboard. Just by swiping the finger against the fingerprint sensor, the following
functions will be enabled:
Logon to Windows and access a security-enabled homepage through IE
(Internet Explorer).
Files and folders can be encrypted/decrypted and third party access to them
prevented.
Disable the password-protected screen-saver when returning from power-
saving (standby) mode.
Power-on Security and Single Sign-On feature.
Authentication of the User Password and Hard Disk Password when booting
up the computer.
Note: To "swipe"refers to the action of reading a fingerprint using
the fingerprint sensor.

Points to note about the Fingerprint Sensor

Failure to follow these guidelines might result in (1) damage to the sensor or
cause sensor failure, (2) finger recognition problems, or lower finger recognition
success rate.
Do not scratch or poke the sensor with your nails or any hard or sharp
objects.
Do not press the sensor strongly.
Do not touch the sensor with a wet finger or any wet objects. Keep sensor
surface dry and free of water vapor.
Do not touch the sensor with a soiled finger. Minute foreign particles on a
soiled or dirty finger may scratch the sensor.
Do not paste stickers or write on the sensor.
Do not touch the sensor with a finger or any object with built-up static elec-
tricity.
Observe the following before you place your finger on the sensor whether for
fingerprint enrollment/registration or recognition.
4-2