How To Learn More About Intervideo Windvd Creator; Important Information For Use - Toshiba Satellite M110 User Manual

Writing CD/DVDs On DVD Super Multi (+-R DL) Drive
How to make a DVD-Video
Simplified steps for making a DVD-Video from video data captured from a DV
Camcorder:
1. Click [Start]-[All Programs] - [InterVideo WinDVD Creator 2] - [Inter-
Video WinDVD Creator] to launch WinDVD Creator.
2. Click [Capture] button then capture the video data from the DV-Camcorder
via IEEE1394.
3. Click [Edit] button then drag the video clips from [Video Library] tab to the
edit track.
4. Click [Make Movie] button in the top bar.
5. Click the Right arrow button icon in the center of right side.
6. Put a blank DVD-R/-R DL and DVD+R/+R DL disc or an erased DVD-
RW/+RW disc in the drive.
7. Click [Start] to record to the disc.
8. When recording is finished, the tray opens.

How to learn more about InterVideo WinDVD Creator

Please refer to the on-line Help for additional InterVideo WinDVD Creator infor-
mation.

Important information for use

Note the following limitations when you write video DVD:
1. Editing digital video.
Log in with Administrator rights to use WinDVD Creator.
Make sure that your computer is running on AC power when using
WinDVD Creator.
Operate the computer at Full Power. Do not use power-saving features.
While you are editing DVD, you can display previews. However, if
another application is running, the preview might not display properly.
WinDVD Creator cannot show video on the external monitor when in
simultaneous mode.
WinDVD Creator cannot edit or play copy protected content.
Do not change display settings while using WinDVD Creator.
Do not enter standby/hibernation mode while using WinDVD Creator.
4-37