Tape Length Setting; Recording Mode Setting - JVC GR-AXM10 Instructions Manual

12
EN
T20•30•40 tape length select button
SP-EP recording
mode button
Set POWER to "CAMERA".
Tape length indicator
T30
Recording mode indicator
SP
T20 T30 T40
LCD monitor or
viewfinder
SP EP
GETTING STARTED

Tape Length Setting

Set the tape length according to the length of the tape
used.
SET TAPE LENGTH
1
Press T20•30•40 until the required indication
appears in the LCD monitor or the veiwfinder. T20 =
20 minutes of recording time, T30 = 30 minutes,
and T40 = 40 minutes (in SP).
NOTE:
The tape remaining time (
LCD monitor or the viewfinder is correct only if the
correct tape length has been selected.

Recording Mode Setting

Set depending on your preference.
SET RECORDING MODE
1
Press SP•EP button. "SP" (Standard Play) provides
higher picture and sound quality and is better for
dubbing, while "EP" (Extended Play) is more
economical, recording at 1/3 the speed of SP.
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
(cont.)
pg. 15) displayed in the