Quick Operation Guide - JVC GR-AXM10 Instructions Manual

QUICK OPERATION GUIDE

SUPPLY POWER
BATT. RELEASE
Using the battery pack
1
Hook-on the battery pack's top end to the
camcorder. (Charging procedure,
2
Push in the battery pack until it locks into
place.
To remove the battery pack
Slide BATT. RELEASE and pull out the battery
pack.
PLAYBACK
PLAY/PAUSE
1
Set to "PLAY"
1
Set the power switch to "PLAY".
2
Press REW.
— The tape will automatically stop at the
beginning of the tape.
3
Press PLAY/PAUSE.
— Playback starts and the playback picture
appears in the viewfinder or the LCD
monitor.
• To stop playback, press STOP.
(For more details,
• The viewfinder switches off automatically to
save power when the LCD monitor is opened
at an angle of over 45 degrees.
• The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
Or simply play back the tape on a VHS VCR
using the Cassette Adapter (VHS Playpak).
pg. 35
Hook on.
1
2
Push in.
pg. 8)
3
STOP
2
REW
pg. 32.)
INSERTING A VIDEO
CASSETTE
4
1
MONITOR OPEN
1
Slide MONITOR OPEN to open the LCD
monitor.
• Open to an angle of over 45 degrees.
2
Press EJECT to open the cassette holder.
3
Insert a video cassette.
4
Press PUSH to close the cassette holder.
(For more details,
SHOOTING
2
Set to "CAMERA"
3
Recording Start/Stop button
1
Slide the LENS COVER open/close knob to
open the lens cover.
2
Set the power switch to "CAMERA".
— The power indicator will light and an
image will appear in the LCD monitor or
the viewfinder.
3
Press the Recording Start/Stop button.
— Recording starts.
• To stop recording temporarily, momentarily
press the Recording Start/Stop button once
again.
(For more details,
• The viewfinder switches off automatically to
save power when the LCD monitor is
opened at an angle of over 45 degrees.
• The LCD monitor turns on/off when it is
opened/closed at approx. 45 degrees.
EN
EJECT
2
3
PUSH
pg. 13)
1
LENS COVER
open/close knob
pg. 15, 16)
5