Index; Lcd Monitor/Viewfinder - JVC GR-AXM10 Instructions Manual

INDEX

LCD monitor/Viewfinder

8
9
0
!
@
#
$
LCD monitor/Viewfinder Indications
1
* Cassette Warning/Remaining
Tape Time .........................................
When no cassette is inserted or when Erase
Protection tab is not in the position that allows
recording, the Cassette (
Otherwise, the Remaining Tape Time is
displayed.
2
* Recording Mode (SP/EP) Indicator ....
3 9
, PROGRAM AE Indicator ................
3
Displayed at for approx. 1 second when the
PROGRAM AE select dial is switched from one
position to another. Then only the indicator
9
remains at .
4
Program Manager Function
Indication ...........................................
Appears when the PROGRAM AE select dial is
set to any position other than AUTO LOCK.
5
Lens Cover Warning ...........................
6
* Tape Length Display .........................
7
Zoom Level Indicator ..........................
8
Recording Indicator ............................
0
Fade–Standby Indicator ......................
!
Interval Time/Recording
Time Indicator .....................................
@
Record–Standby Mode Indicator .........
#
Instant Title Display ............................
$
Date/Time Character Display ..............
* : During recording, pressing DISPLAY lets you remove indications marked with * from the screen.
1 * 2 * 3
18MIN DISP.
REC SP
SEPIA
LENS COVER
FADE
P AUSE
1MIN
1/2S
TAPE END
MERRY CHR ISTMAS
25 97
DEC .
pg. 15
)Warning blinks.
pg. 12
pg. 20
pg. 24
pg. 15
pg. 12
pg. 18
pg. 15
pg. 24
pg. 30
pg. 15
pg. 25
pg. 26
*
4 5 6 * 7
T30
– 05
MWB
INDEX
10 : 24
AM
%
* Battery Pack Remaining Power Indicator
Changes as follows according to the battery
pack's remaining power level:
"
almost gone, the indicator blinks, then the unit
shuts off. Replace the battery pack with a fully
charged one.
(Note: The symbol containing 3 darkened
squares —
that the battery pack is fully charged.)
^
Focus Indicator ...................................
&
Exposure Level Indicator .....................
*
White Balance Mode Indicator ...........
(
Menu Setting Change Indicator ...........
)
Index Code Marking ...........................
q
Clock Warning
Displayed for about 5 seconds if the clock
(lithium) battery is not in place or is exhausted
when power is turned on. Also displayed for
about 5 seconds when clock battery becomes
exhausted while using the camcorder.
For inserting or replacing the clock
battery ................................................
w
Condensation Warning
When this indication appears, all functions are
disabled. Turn the unit off (without removing the
power source) for a few hours, and when you
turn it on again the indicator should disappear.
e
Tape End Display ................................
Appears when the end of the tape is reached
during playback, recording or fast-forward.
EN
% *
^
&
*
(
)
q
w
e
". When the power is
— does not necessarily mean
47
pg. 22
pg. 21
pg. 27
pg. 28
pg. 41
pg. 10
pg. 15