Moog Stage Edition User Manual page 24

LP User's Manual - The User Interface
ADVANCED PRESET:
ANALOGUE MODE:
KEYBOARD PRIORITY:
Page 26
Advanced Presets is a set of menus that allows you to access
additional parameters for each preset. These parameters are stored
individually for each preset. There are ten Advanced Preset menus
available:
- Filter Poles (1-4)
- EGR Release
- Trigger Options
- Keyboard Priority
- Filter Sensitivity
- Additional LFO Modulation Sources (2)
- Pitch Bend options
- Secondary Modulation destinations.
- Pot Mapping
For more information, see the Advanced Preset menus section below.
Analogue mode controls the way the analog edit controls work. In
SNAP mode, the parameter will 'snap' instantaneously to the current
potentiometer setting. In PASS-THRU mode, the parameter value
stays constant until the potentiometer passes through the current
value. In TRACK mode, the parameter value moves in the same di-
rection as the knob is rotated (left or right) until the value and knob
position are identical. To change modes, use the CURSOR button
to highlight the parameter, then use the VALUE knob to set the new
parameter value.
Values: PASS-THRU, SNAP, TRACK; the default value is Track
The Keyboard Priority menu allows you to select from 3 differ-
ent types of keyboard priority. Keyboard priority for a monophonic
instrument determines what happens when more than one key is
pressed. A setting of LOW NOTE causes the lowest key pressed
to sound, a setting of HIGH NOTE causes the highest key pressed
to sound, and a setting of LAST NOTE causes the most recent key
pressed to sound. To change the keyboard priority, use the CURSOR
button to highlight the parameter, then use the VALUE knob to set
the new parameter value.
Values: LOW NOTE, HIGH NOTE, LAST NOTE;
the default is LAST NOTE