Self-Levelling Suspension Warning Lamps K134 - Audi A6 242 Service Manual

Self-levelling suspension
warning lamp K134
The warning lamp ...
... is constantly illuminated in the case of
corresponding system errors or when the
system is switched off.
... ...flashes in the case of extremely low or
high levels. <–55 mm/>+30 mm.
... ... flashes during final control diagnosis.
... flashes when the control system is
switched off (only possible with diagnostic
tester).
After switching off the ignition, K134
illuminates for a function check and
extinguishes after the control system has
performed internal control unit test sequence
(unless an error is present).
The vehicle should not be driven as
long as the warning lamp is flashing, as
low vehicle parts may be damaged due
to inadequate ground clearance.
If the warning lamp remains on
continuously to indicate a system error,
the system is switched off.
The driver is requested to contact the
nearest Audi service centre.
Warning lamp K134
242_050
55