Download  Print this page

Cleaning Instructions; Care And Maintenance; Important Safeguards - Black & Decker BDHV-1010 Instruction Manual

120v ac 60hz 0.64a 70w 10" high velocity air circulator
Hide thumbs

Advertisement

CLEANING INSTRUCTIONS

WARNING: To avoid the risk of electrical shock, always make sure the fan is
unplugged from the electrical outlet before cleaning or servicing.
CAUTION: This fan should not be disassembled when cleaning internal parts,
such as the blade and motor. Disassembly may result in product damage. Never
use liquids or abrasive cleaners to clean the fan.
1.
Wipe the exterior surfaces with a soft damp cloth. Dust can be removed from the
guard and blades with a small vacuum.
2.
Do not immerse the motor, switch or wires in water and never allow water to drip
into a blade or the motor housing.
3.
Do not use any chemical cleaners such as acid or alcohol to clean the fan.
4.
Make sure the fan is completely dry after cleaning

CARE AND MAINTENANCE

WARNING: Do not attempt to open any part of the motor housing, as it can cause
electrical shock. This fan has been permanently lubricated at the factory and
therefore will never require further lubrication. Additional lubrication of electric
motor parts could create a fire hazard.

Fan should be stored in its original box and in a room with low humidity.

Make sure the fan is completely dry before using it.
NOTE: If you experience any problems, return the fan to the place of original
purchase. Do not attempt to open the motor housing. Doing so may result in
damage or personal injury.
.
6

IMPORTANT SAFEGUARDS

WARNING: To reduce the risk of electrical shock, do not attach the fan to a
window or place the fan near a window.
WARNING: To reduce the risk of a fire or electrical hazard, DO NOT USE
EXTERNAL DEVICES TO CONTROL FAN SPEED.
READ ALL INSTRUCTIONS BEFORE USING
1.
Only use this unit as instructed in this manual. Any other uses may cause a fire, hazard
or an electric shock.
2.
The fan is intended to cool rooms for INDOOR, DOMESTIC HOUSEHOLD use only.
Therefore, the fan should not be used in commercial or industrial locations. In addition,
the fan should not be used outdoors, attached to a window or placed near a window.
3.
This product is not recommended with use of electrical extension cords, this will
greatly increase risks of fire and or electrical shock.
4.
To reduce the risk of personal injury and electric shock, the fan should not be played
with or placed where small children can reach it. Never leave children unattended when
the fan is on or plugged in.
5.
Always unplug the fan from the outlet before cleaning, when not in use or when
moving the fan from one location to another.
6.
Never submerge the fan in water.
7.
Do not operate the fan in the presence of explosive and/or flammable fumes.
8.
Do not place the fan or any of its parts near an open flame or a cooking or other heating
appliance.
9.
Never insert your fingers or anything else through the fan guards. Never drop or insert
objects into any of the fan's openings.
10. Never plug the fan into an outlet with wet hands or a wet cord.
11. Do not operate the fan if it has a damaged cord or plug. Instead, return it to an
authorized dealer in which you purchased the product or call the customer service
number for assistance.
12. Avoid touching the fan when its parts are moving.
13. Never yank the cord. When disconnecting the fan, grip the plug and pull it from the
outlet.
14. Do not operate the fan if the front and rear grill are damaged or not securely tightened.
15. To ensure a longer durability, avoid using the fan 24 hours a day, seven days a week.
16. Do not run the cord under carpeting. Do not cover the cord with throw rugs, runners, or
similar covers. Do not place the cord under furniture or appliances. To prevent people
from tripping and hurting themselves, ensure cord is away from traffic areas.
17.
This product has overload protection (i.e. a fuse). A blown fuse indicates an overload or
short-circuit situation. If the fuse blows up, immediately unplug the fan from the outlet.
Replace the fuse as per the User Servicing Instructions and follow product instructions
to properly check the fuse rating. If the replacement fuse blows up, it could be because
of a short circuit. Regardless of the reason, do not use the fan. Instead, return it to an
authorized dealer in which you purchased the product or call customer service for
assistance.
3

Advertisement

loading

  Related Manuals for Black & Decker BDHV-1010

This manual is also suitable for:

Bdht-5016