Dhcp Clients - Tenda N3 11N User Manual

Router User Manual
DHCP Server: Check or uncheck the box to enable or disable the
●
device's DHCP server feature.
IP pool start address: Enter the starting IP address for the DHCP
●
server's IP assignment.
IP pool end address: Enter the ending IP address for the DHCP
●
server's IP assignment.
Lease Time: The length of time for the IP address lease. Configuring a
●
proper lease time improves the efficiency for the DHCP server to reclaim
disused IP addresses.

6.2 DHCP Clients

This section not only displays a DHCP dynamic client list but also
includes a configurable Static DHCP assignment feature.
The DHCP client list displays IP addresses assigned by the built-in
DHCP server, MAC addresses, host names and lease time. If you would
like some devices on your network to always have fixed IP addresses,
you can manually add a static DHCP assignment entry for each such
device. You can manually add an IP address and a MAC address, and
then whenever a host with this MAC address connects to the router, it will
always get the same IP address (the one you just added). According to
the connected computer's MAC address, the router checks relevant
entries in its DHCP reservation list and decides what IP address to assign
to this host (an unused IP from DHCP IP address pool, or a reserved
one): If it fails in finding a reserved IP address for this MAC address in the
list, it will immediately assign an unused IP from its DHCP IP address
pool; and if such IP is found, it will be assigned to this host so as to
ensure that host with a static DHCP assignment always get this reserved
IP address.
N3 11N Wireless Broadband
47