Chapter 5 Wireless Settings; Basic Settings - Tenda N3 11N User Manual

Router User Manual
recommended.
AUTO: DO NOT change this default setting unless you are connecting
●
an excessively long Ethernet cable from your ISP, which may degrade
drive capability, to the router's WAN port.
10M HALF-duplex: Select it if your router's WAN port does not function
●
properly when connected to an Ethernet cable from your ISP; excessive
length of the cable may degrade drive capacity of the WAN port.
10M FULL -duplex: Select it to set router's WAN port to work at
●
10Mbps in full duplex mode, improving WAN port drive capacity.
100M HALF-duplex: Select it to set router's WAN port to work at
●
100Mbps in half duplex mode.
100M FULL-duplex: Select it to set router's WAN port to work at
●
100Mbps in full duplex mode.

5.1 Basic Settings

N3 11N Wireless Broadband

Chapter 5 Wireless Settings

33