Table of Contents
Advertisement
English Quick Installation Guide
Hardware Overview
The Front LEDs
Lit orange red when
power is ON. Lit red
means system is fail.
Lit green when the
system is ready.
Lit when connected to an
Ethernet device. Green for
100Mbps; Orange for 10Mbps.
Blinking when data is
Transmitted / Received.
´
The Rear Ports
Connect the
antenna.
Connect the supplied RJ-11
("telephone") cable on this
port when connecting to the
ADSL/ telephone network.
* Note: For WPS configuration, please refer to the WPS section of User Manual.
Lit green when the wireless
connection is established.
Flashes when the device
sending /receiving data.
Lit when the USB
device is ready.
Flashes when
sending /
receiving data.
Connect your computer
to a LAN port, using a
UTP Ethernet cable.
Connect the USB
cable on this port.
Lit green when
successfully connected
to an ADSL DSLAM
("Line sync")
Lit green when IP connected.
Lit green
Flashes green when IP connected
when there
and IP traffic is passing thru the
are emails in
device. Lit red when device
the inbox.
attempted to become IP connected
and failed. Lit off in bridged mode or
when connection WAN is absent.
Press it to reset the
device or restore to
factory default settings.
Push WPS button to
trigger Wi-Fi Protected
Setup function*.
Connect the supplied
power adapter to this
jack.
Power ON/
OFF switch
4
Advertisement
Table of Contents
