Table of Contents
Advertisement
Maintenance notice
To protect the normal use of all accessories, please kindly make sure understand and pay attention to
following points.
Power input AC100~240V, Output DC 12V/3A. Using power of any other specification may damage
the device beyond repair.
Under normal working status, power adapter will be warm. Keep the Mvix Ultio Pro and its power
adapter in well ventilated area. Do not put the device in bed, sofa, or similar area with sub-optimal
cooling effect.
Do NOT place anything on top of Mvix Ultio Pro. Objects placed on top may cause operational
interference with the device.
Do not try to repair the unit yourself by opening its electronic components. Observe Precaution
when handling Electrostatic Sensitive Devices.
If the power cable is broken or stripped or if the device comes in contact with any liquid, it is strongly
advised to power down the device and remove the power cable immediately.
Always disconnect power cable when rebooting your media player.
Firmware Upgrade Failure Recovery Process
Shut down the Player and Remove the power cable from Mvix Ultio Pro.
Download a fresh copy of the latest firmware to USB drive, and connect the USB drive to the player.
Press Power button (on Mvix Ultio Pro), at the same time insert the power cable at back. (Note:
Please press power button for 10 seconds before plugging in the power cable.
Always use COMPOSITE VIDEO OUTPUT during firmware upgrade and failure recovery
Troubleshooting
50
Advertisement
Table of Contents
