Usb Host Interface - Mvix Ultio Pro User Manual

USB HOST interface

Mvix Ultio Pro comes with two USB-Host Ports to expand its media storage capacity. You can not only store
all your digital media on Ultio Pro's internal HDD but also on external storage devices such as portable HDDs,
USB drives, DVD ROM etc. The USB-host port is built upon a full speed USB-compliant host/function
processor for most optimal performance. It is compatible with all standard, external mobile hard disk drives,
Flash / thumb drives, digital cameras, card readers and other data storage devices.
•
Turn off your Mvix Ultio Pro before connecting your external device to the player.
•
Some 2.5" external-HDD may require additional power to the external HDD to be recognized. Use
the AC-adapter included with your 2.5" external HDD to enable its use with the Mvix player.
Mvix Ultio Pro is also compatible with external USB-DVD drives . Simply connect the USB-DVD drive to the
USB-host port of Ultio Pro and you can play the contents from the DVD disk directly. At the same time, you
can copy contents from your DVD-ROM discs to the internal hard drive (inside Mvix Ultio Pro) for backup.
This backup functionality will not work for encrypted or copy-protected DVDs.
From the main home section of Ultio Pro, select "External DVD". If, in your System Setup, "DVD Auto Play" is
turned on, the drive will automatically identify and begin to play DVD. Use your Ultio Pro remote to navigate
the playback from the device. During the playback, press the "stop" to stop playback, press the "return" to
return to Ultio Pro's main menu page. Once on the main menu page, press "stop" to eject the DVD from the
drive.
Initial Setup
28