Canon PowerShot S200 User Manual page 29

Shoot.
z z
Press the shutter button all the way
down.
z z
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
z z
Keep the camera still until the shutter
sound ends.
z z
After displaying your shot, the camera will
revert to the shooting screen.
Shooting Movies
Start shooting.
z z
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
Elapsed Time
time.
z z
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
z z
Frames displayed around any detected
faces indicate that they are in focus.
z z Once recording begins, take your finger
off the movie button.
Resize the subject and
recompose the shot as needed.
z z
To resize the subject, repeat the
operations in step 3 (= 28). However,
note that the sound of camera operations
will be recorded, and movies shot at
zoom factors shown in blue will look
grainy.
z z
When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
Finish shooting.
z z
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
z z
Recording will stop automatically when
the memory card becomes full.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting
Modes
4
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
29