Canon PowerShot S200 User Manual page 17

3
Compose the shot.
z z
To zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto),
and to zoom away from the subject, move
it toward <j> (wide angle).
4
Shoot.
Shooting Still Images
Focus.
z z
Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
z z If [Raise the flash] appears on the screen,
move the <h> switch to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Shoot.
z z
Press the shutter button all the way
down.
z z
As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
z z
Keep the camera still until the shutter
sound ends.
z z
After displaying your shot, the camera will
revert to the shooting screen.
Shooting Movies
Start shooting.
z z
Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
Elapsed Time
time.
z z
Black bars displayed on the top and
bottom edges of the screen indicate
image areas not recorded.
z z
Frames displayed around any detected
faces indicate that they are in focus.
z z Once recording begins, take your finger
off the movie button.
Finish shooting.
z z
Press the movie button again to stop
shooting. The camera beeps twice as
recording stops.
Cover
Before Use
Common Camera
Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Auto Mode
3
Other Shooting
Modes
4
P Mode
5
Tv, Av, and M
Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
17