For More Accurate Editing - JVC GR GR-DVL307 Instructions Manual

Program 1
I N O U T MODE
: ~
1 – – – – – –
~
2
~
3
~
4
~
5
~
6
~
7
~
8
:
T I M E C O D E – – – –
:
T O T A L 0 0 0 0
VCR
(Recording deck)
Remote sensor
R.A.EDIT ON/OFF
RM-V716U
(Provided with OR
GR-DVL507 only)

For More Accurate Editing

Some VCRs make the transition from Record-Pause to
Random Assemble
Record mode faster than others. Even if you begin editing
Editing Menu
for the camcorder and the VCR at exactly the same time,
you may lose scenes you wanted, or find that you have
recorded scenes you did not want. For a cleanly edited
tape, confirm and adjust the timing of the camcorder
against your VCR.
DIAGNOSING VCR/CAMCORDER TIMING
1
TV
2
3
ON/OFF
RM-V700U
(optional)
Play back the tape in the camcorder, then point the
remote control at the camcorder's remote sensor and
press R.A.EDIT ON/OFF or ON/OFF.
The Random Assemble Editing Menu appears.
Perform Random Assemble Editing on Program 1
only. In order to check VCR and camcorder timing,
select the beginning of a scene transition as your Edit-
In point.
Play back the dubbed scene.
•If any images from the scene prior to the
transition you chose for your Edit-In point were
recorded, that means your VCR moves too quickly
from Record-Pause to Record mode.
•If the scene you tried to dub starts in progress, the
VCR is slow to start recording.
CONTINUED ON NEXT PAGE
49
EN