Installation; Removing The Base Stand; Mounting On The Wall - TruTech WIDESCREEN 32" THIN LCD MONITOR User Manual

REMOVING THE BASE ST

REMOVING THE BASE STAND

REMOVING THE BASE ST
REMOVING THE BASE ST REMOVING THE BASE ST
WARNING: The LCD Display is very fragile, and must be protected at all times
when removing the base stand. Be sure that no hard or sharp objects, or
anything that could scratch or damage the LCD display, come in contact with it.
Do NOT place pressure on the rear of the unit at any time because the screen
could crack.
1. Disconnect any cables or cords connected to the unit.
2. Lay the unit down on a flat surface, so the back side is facing up, making
sure to place a soft cushioned material (such as a pillow or thick piece of
foam) beneath the screen.
3. Remove the four screws and then remove the BASE STAND from the unit.

MOUNTING ON THE WALL

MOUNTING ON THE WALL MOUNTING ON THE WALL
MOUNTING ON THE WALL MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-
compliant 7.9" x 7.9" (200mm x 200mm) mounting kit designed for flat-panel
TVs (sold separately). Mount this unit according to the directions included with
the mounting kit.
Four mounting
14
7.9"
holes
AND AND AND
AND
INST ALLA INST INST ALLA TION ALLA ALLA TION TION TION
INST INST ALLA TION